Contact Us

Contact: Ms. Jenna
Mobile: +86 15721442569
Email: jenna@shsunshinemachinery.com


Contact: Ms. Amy
Mobile: +86 13023225236
Email: amy@shsunshinemachinery.com

Home > News > Content
Triangle Piece-counting Packing Machine Maintenance
Oct 30, 2017

Triangle Piece-counting Packing Machine Maintenance

I. Lubrication

1. Lubricate the gears, bearings and the moving parts regularly.
2. The Deceleration Device must not run with no oil. After running 300 hours for the first time, clean the inside of the device and put in new oil. After that change oil every 2500 hours.
3. Do not to drop the lubricant onto the Driving Belt.


II. Clean

1. Clean such parts as the Bucket, Turning-plate etc that touch the packing materials each time after turning off the machine.
2. Regularly clean the Thermal Sealer to ensure the nice sealing track.
3. Immediately clean the materials scattered and keep the parts tidy to maintain the lifespan of the machine.
4. Regularly clean the Photo Senor to make it work better.
5. Regularly remove the dust in the Electric Control Box to avoid short circuits or poor connection.


III. Maintenance

1. Regularly check the screws of every part in case they are loose.
2. Make sure that the Electric Control Box and the wire connections are clean and dry to avoid electrical malfunction.


Maintenance Lists


triangle packing machine maintenance.png


Clients Feedbacks


Triangle packing machine checklist.png